Posted on November 15, 2021
I was going through images on external drives and found a series of Infrared images taken at Davidsons Mill Pond Park. I chose 2 images from the series to make a longer 2 image Infrared B&W Panorama. These were taken with a Canon R with a 24-105mm lens and a Hoya r 72 InfraRed filter. To balance the images you also have to photograph a white card with the InfraRed filter for color correction and then converting to Grayscale B&W.
Category: Cloudscapes, Davidsons Mill Pond Park, Equipment, Favorite Locations, Image Stacking, InfraRed Images, Panorama & Stacked Images, Panoramas, Skies and Clouds, Skyscapes & Clouds Tagged: Balancing infrared images, hoya r72 InfraRed filter, Infrared, Infrared Panoramas, Infrared Photography, Using InfraRed Filers for Photography
Posted on April 23, 2020
I believe we have had a stay at home order in NJ now for 34 days! We can not even go to a park to walk. But we can walk outside in our Condo Community (with a mask). So I thought I would go to the Meeting House on the Commons in our community. It is used for meetings, concerts and various church services. It is an interesting building & Commons for photography, some of which I have posted before. So I thought I would practice some B&W Infrared Photography. I shot a mix of multi-image panoramas along with single shot images. For this I was using a Canon R camera with a Hoya R72 Infrared Filter on with a Canon 17-40mm lens. All images were shot with the lens at 17mm. With the Canon R Mirrorless Camera Body I can actually see what I am composing/framing in the viewfinder with the R72 Infrared filter attached on the lens. On a standard DSLR all you see is BLACK in the viewfinder. So you would compose/frame your shot, then put the filter back on. Then you would manually adjust your focus point to the IR focus mark on the lens. (See images detailing this procedure below in this post). Since with the lens set to 17mm and shooting buildings my focus for all was set manually at infinity focus on the IR Focus marker. Also for shooting with this R72 filter it is necessary to photograph a white piece of paper for adjusting the White Balance when Editing your IR images.
Image showing R72 filter used and small white paper you need to photograph out in the field for preparing proper white balance for adjusting your files
When you Open your IR Image it has a Reddish Orange Cast from the R72 Filter. Use the steps below to convert to B+W Grayscale Image.
Since you are using long exposures because of the R72 filter, clouds seem to get an even smoother feathery look. I chose an f/stop to get a ~14 second exposure. If you go too long the clouds have even less detail which looks a little bland and gray.
17mm, f/14, 13 seconds
7 image panorama, @ 17mm
2 image panorama, @ 17mm, 14 seconds each
Below are a series of images showing the manual setting for infinity focus for InfraRed shooting. If shooting closer than infinity, take filter off, manual focus and adjust that spot to the IR Red line on focus area of your lens. Hopefully by seeing the 3 images below you will understand how to set the focus manually to the correct IR focus point.
Lens Manually Set for IR Focus @ infinity
Category: Blog, Landscapes, Panorama & Stacked Images, Panoramas, Photo Tips, Photography Ideas for Stay At Home Order, Skyscapes & Clouds, Tips & Techniques Tagged: 17-40mm Canon lens, Balancing infrared images, canon R, Hoya R72, hoya r72 InfraRed filter, Infrared Photography, Infrared Photography Tips, Using InfraRed Filers for Photography
Posted on July 24, 2019
We went to one of my favorite small Natural Areas that was close to where we used to live. The clouds were impressive so I shot a series of panoramas @ 17mm with a Canon 17-40mm lens and 12mm with a 12-24mm lens on a Canon R. I was mostly shooting with the Hoya R72 InfraRed Filter, but did a few without the R72 filter also.
The images below show the series of panorama images going from the raw image as shot with the Hoya R72 InfraRed filter, then the image balanced to the white card I also shot for color balance. Then going to the grayscale B&W Image.
IR Image Hoya R72 Filter – @ 17mm – 4 Horizontal Image Pano
Above Image color balanced with White Card Image for color balance
Featured Image Converted to BW Infrared after white balancing color infrared image
7 Images (vertical) @ 17mm – Converted to BW Infrared
7 image panorama -shot @ 12mm – 7 vertical images combined in Photoshop